KF10 Off-Road RC Truck 1/10 45km/h Brushed Motor
KF10 1/10 Scale 4WD High-Speed RC Truck
The KF10 is a full-scale 1/10 off-road beast built for serious fun. With four-wheel drive, independent suspension on all four wheels and a powerful motor, this truck tears across dirt, gravel and grass with confidence. The car comes with a new easy to use battery design for easier battery changeover and protection.
Key Features
- 1/10 scale 4WD off-road truck with aggressive stance, oversized body and off-road styling
- 2.4GHz gun-style transmitter with up to approx. 90–100 m range; multiple vehicles can run together without interference
- Full proportional control for precise forward/reverse and steering (not just on/off)
- Independent front and rear shock-absorbing suspension for better handling and stability
- Deep-tread oversized tires for extra grip on dirt, grass and rough terrain
- Metal gears and ball bearings in the drivetrain for durability at high speeds
- High-torque steering servo for responsive steering
- 2S, 1500mAh rechargeable battery providing around 16 minutes of run time per charge (you get 1 battery with the car)
- New battery housing for faster changeovers and protection
- Splash-proof electronics and ESC waterproof design for puddle splashes and damp conditions*
- Anti-jamming system and low-voltage protection for more reliable control and safer battery use
Smart Radio Controls
- Steering trim for fine-tuning straight-line driving
- Steering reverse switch to swap left/right if needed
- Steering dual-rate (double speed adjustment) to increase or decrease steering sensitivity
- Speed mode plus proportional trigger for smooth acceleration and braking
Specifications
- Model: KF10
- Scale: 1:10
- Drive: 4WD (four-wheel drive)
- Color: Black
- Product size: 288 × 365 × 154 cm
- Frequency: 2.4GHz
- 2S Battery (vehicle): 1500mAh lithium battery with protective plate
- Run time: approx. 16 minutes
- Charging time: approx. 120 minutes
- Charger: USB (with anti-overcharge protection)
- Remote control distance: ≥ 90 m
- Transmitter power: 3 × AA batteries (not included)
- Water resistance: splash proof
- Functions: forward, backward, left turn, right turn, brake, adjustable left/right ratio, direction fine-tuning, anti-jamming, low-voltage protection
*Splash-proof design is intended for light splashes only – do not fully submerge the vehicle.
Pre-run safety check
Before the first drive and before every run, check that the wheels are securely attached. Check wheel nuts or wheel-retaining screws (where fitted), plus other accessible chassis, steering and suspension fasteners. Ready-to-run models still need these checks.
Switch the vehicle off, disconnect its battery where possible, and allow any engine or hot components to cool before handling. Use the correct hand tool and follow the model's manual and any specified torque settings. Do not overtighten, force plastic fixings or lock up parts that should move freely.
Recheck after the first short run, after wheel changes and after impacts. If a wheel is loose, a fixing will not secure correctly, or anything is damaged, stop using the model and contact Atlas & Quill before driving again.