Skip to product information
HSP 94108 1:10 4WD Nitro RC Monster Truck *coming soon*
£239.99
Monster-truck presence. Nitro-engine character.
The HSP 94108 brings nitro power to a 1:10-scale, four-wheel-drive RC monster truck. Its truck body and large off-road wheels give it a different stance from an open-wheel buggy, with a hands-on driving experience for outdoor RC sessions.
Designed for enthusiasts who enjoy preparing and maintaining their model as well as driving it, the 94108 combines a 400 mm-long vehicle with a supplier-stated 18CXP nitro engine.
Key features
- 1:10-scale monster truck: An off-road truck layout with four-wheel drive.
- Nitro power: Supplier engine designation 18CXP.
- Large off-road wheels: Supplier-stated wheel diameter of 120 mm and width of 60 mm.
- Dimensions: 400 mm long, 310 mm wide and 185 mm high, with a 275 mm wheelbase.
Supplier-stated technical specification
The following are nominal figures from the supplied specification sheet. Final specification, weight and equipment for the incoming version are awaiting confirmation.
| Brand / model | HSP 94108 |
|---|---|
| Scale | 1:10 |
| Vehicle type | Off-road RC monster truck |
| Drive | Four-wheel drive (4WD) |
| Power source | Nitro engine |
| Engine designation | 18CXP (supplier specification) |
| Length | 400 mm |
| Width | 310 mm |
| Height | 185 mm |
| Wheelbase | 275 mm |
| Ground clearance | 30 mm |
| Gear ratio | 13.34:1 (supplier notation) |
| Vehicle weight | Approximately 2,080 g (2.08 kg); final version to be confirmed |
| Wheel diameter | 120 mm (supplier specification) |
| Wheel width | 60 mm (supplier specification) |
Important fuel and setup information
This is a nitro-powered model, not a petrol car. Use only the model-engine glow/nitro fuel specified for the fitted engine. Do not use petrol or diesel.
Read the supplied vehicle and engine instructions before use. Follow the manufacturer's starting, running-in and maintenance procedures. Operate outdoors in a suitable area away from roads, bystanders and pets.
Availability and package information
Coming soon. Final engine details, transmission configuration, radio equipment, box contents and additional starting-equipment requirements are awaiting confirmation. Fuel, starting equipment and batteries for the radio system should not be assumed to be included.
For questions about the incoming model or its package, contact Atlas & Quill.
Pre-run safety check
Before the first drive and before every run, check that the wheels are securely attached. Check wheel nuts or wheel-retaining screws (where fitted), plus other accessible chassis, steering and suspension fasteners. Ready-to-run models still need these checks.
Switch the vehicle off, disconnect its battery where possible, and allow any engine or hot components to cool before handling. Use the correct hand tool and follow the model's manual and any specified torque settings. Do not overtighten, force plastic fixings or lock up parts that should move freely.
Recheck after the first short run, after wheel changes and after impacts. If a wheel is loose, a fixing will not secure correctly, or anything is damaged, stop using the model and contact Atlas & Quill before driving again.